Marble-lime paint, smooth

New

Marble-lime paint (smooth) is a natural lime-based interior and facade paint, which creates a durable, matte and vibrant surface finish. Due to its high alkalinity, the paint naturally helps to inhibit mold formation and is well suited for both bathrooms and other damp surfaces. Tinted surfaces remain characteristically cloudy and deep.

Binder: marble lime hydrate (air lime)
Tools: large soft brush, paint sprayer
Layers: 2 layers for interiors, 3 layers for facades
Substrates: mineral plasters, concrete, stone, masonry, primed gypsum boards

Cost standard

~200 ml/m² for one layer

Zones

Dry rooms, Wet rooms

Cost standard

~200 ml/m² for one layer

Composition

marble-lime hydrate
marble powder and marble sand
water
methyl cellulose
citric acid

Compare

Marble-lime paint (smooth) is a traditional lime paint, suitable for both interiors and exteriors. The paint is based on marble lime and contains only natural mineral fillers. Thanks to its high pH level, the surface naturally inhibits mold growth and maintains good water vapor permeability. The result is a durable, matte finish that ages gracefully over time.

Ingredients and properties

Marble lime hydrate based
Contains marble sand and marble powder
High alkalinity (pH 13)
Does not contain preservatives
Odorless
Diffuse and breathable
Antistatic
Suitable for people with allergies
Good coverage
Can be tinted with mineral pigments up to 10%
Suitable for use in damp rooms

Layers and consumption

Usually 2 layers for interiors
Preferably 3 layers for facades
Average consumption: 300–400 ml/m² for two layers
Exact consumption depends on substrate absorption and structure.

Substrate

Clean, dry and strong
Evenly absorbing and oil-free
Suitable for mineral plasters, concrete, stone, masonry and primed gypsum boards
Not suitable for wood, plastic, distempers and oil or dispersion paints
Not suitable for glossy or non-absorbent surfaces

Tools

Large soft brush
Paint sprayer (min. 200 bar)
Oval brush for a softer result
Square brush to highlight the brush strokes

*]:pointer-events-auto R6Vx5W_threadScrollVars scroll-mb-[calc(var(–scroll-root-safe-area-inset-bottom,0px)+var(–thread-response-height))] scroll-mt-[calc(var(–header-height)+min(200px,max(70px,20svh)))]” dir=”auto” data-turn-id=”request-69d8c01e-5bf4-832a-bc46-866a692c37a0-6″ data-turn-id-container=”request-69d8c01e-5bf4-832a-bc46-866a692c37a0-6″ data-testid=”conversation-turn-194″ data-scroll-anchor=”false” data-turn=”assistant”>

1. Preparation of the Substrate

Substrate must be clean, dry, stable and evenly absorbent. Remove dust, fat, loose layers and other substances that will reduce adhesion. If necessary, repair damages and prime the surface.

2. Paint preparation

Mix the paint thoroughly before use. When tinting, mix the pigments first into a paste and then add to the paint. If necessary, the paint can be diluted with up to 10% water.

3. Application

Apply the paint to the surface with a large soft brush or paint sprayer. Strongly absorbent surfaces can be lightly moistened before painting. Full coverage is usually achieved with two layers.

4. Decorative techniques

Soft cloudy result: use semi-circular brush strokes in different directions.
Rustic result: use crisscrossing X-shaped strokes
Avoid painting in straight vertical panes in order to not get visible borders between panes.
The brush pattern remains visible in the final result and gives the surface a natural look.

5. Drying

Working temperature min. +8 °C
Drying time between layers at least 8 hours
Avoid strong drafts and drying too quickly
Strongly absorbent surfaces may be moistened before painting.

6. Maintenance and Recommendations

Clean with a soft cloth or brush. Acidic cleaners should not be used. In damp rooms and on higher-wear surfaces a soap treatment can be applied to improve durability.

HA:IM recommendation:
Marble-lime paint (smooth) is perfect for the restoration of historic buildings as well as for the finishing of modern, natural interiors and facades. The cloudy mineral surface creates a depth and liveliness that is not achieved with conventional industrial colors.

Marmor-lubivärv, sile KZ tootejuhend

PDF

183 KB

MSDS_Sumpfkalkfarbe_Kalk_Streichputz_EN_0001 (3)

PDF

2 MB

No files found

Tiiu 12

The Tiiu 12 building is located in the Uus-Veerenni quarter of Tallinn – an area with a history..

Eico paints

Projects coming soon

There are no projects related to this product yet.

Related products

Products that perfectly complement your selection.