Linseed stand oil paint
Kreidezeit Stand Oil Paint is a natural oil paint based on linseed and stand oils, providing highly durable and elastic protection for wooden surfaces. It is suitable for both indoor and outdoor use and ages evenly without cracking or peeling. It is applied as part of a multi-coat system together with a primer and intermediate coats.
- Binder: linseed oil, stand oils (linseed and tung oils)
- Tools: brush, short-pile roller, paint sprayer
- Layers: primer + 2–3 paint layers (“lean-to-fat” system)
- Substrates: wood, also suitable for steel and zinc (with appropriate preparation)
Cost standard
0,06–0,08 l/m² per layer
Zones
Cost standard
0,06–0,08 l/m² per layer
Zones
Manufacturer
Manufacturer
Composition
- linseed oil
- linseed stand oil
- tung oil
- natural earth pigments
Kreidezeit Stand Oil Paint is a weatherproof natural oil paint based on plant oils and mineral pigments with high coverage. The paint does not form a rigid film but remains elastic and diffusible, allowing the wood to “breathe” naturally. Over time, the surface wears evenly, making maintenance easy and allowing repainting without completely removing the previous coating.
Features
- Very good coverage and weather resistance
- Dirt and water repellent
- Elastic – doesn’t crack or peel
- Open to diffusion
- Does not contain synthetic resins or biocides
- Suitable for long term outdoor protection
Layers and consumption
- System: primer + intermediate coat + topcoat
- Consumption: approx. 0,06–0,08 l/m² per layer
- The amount of coats depends on the substrate and desired finish
Substrate
- Clean, dry, grease-free and absorbent
- Wood moisture < 15%
- Suitable for new and previously oil painted surfaces
- Not suitable for acrylic and elastic paint coatings
Tools
- Brush (recommended)
- Short-pile roller
- Mixer for mixing
- Substrate preparation
- Remove loose paint and damaged layers
- Sand the surface (P80–100), rounding the edges
- Clean of dust
- If outdoors treat end grains with primer oil
- Paint preparation
- Mix thoroughly before use
- If necessary, dilute with 5–10% balsam turpentine
- Do not pour paint directly on the surface
- Application
- Apply in thin coats with brush or roller
- Follow the system: primer → intermediate coat → topcoat
- Each layer should be applied only after the previous one has dried
- Avoid build-up of excess material
- Drying and conditions
- Working temperature at least +10 °C
- Overcoatable after ~24 hours
- Full hardening ~4 weeks
- High humidity and low temperatures lengthen drying time
- Maintenance
- The surface wears evenly – easy to maintain and repaint
- If necessary, clean and lightly sand before renewing
Projects coming soon
There are no projects related to this product yet.
Related products
Products that perfectly complement your selection.
