Marble Lime Putty
Kalkglรคtte is a fine marble-lime finishing plaster (grain size up to 0.5 mm) designed for smooth and decorative surfaces. It is breathable, easy to apply and helps level minor substrate irregularities. The final appearance depends on the application technique and can vary from uniform matte to softly clouded decorative effects.
- Binder: Marble lime hydrate
- Tools: trowel, putty knife
- Layers: Typically 1โ2 thin layers
- Substrates: Mineral plasters, concrete, primed gypsum board
Cost standard
~1 kg/mยฒ (1 mm layer)
Manufacturer
Manufacturer
Composition
- Natural mineral composition
- Does not contain preservatives
- Odorless
- Diffusible (breathable)
- Easy to work with
- Levels out minor unevenness
- Abrasion-resistant
- High pH (~13) โ inhibits mold growth
- Natural white tone
- Can be tinted with pigments (up to 5%)
Kalkglรคtte is a natural mineral marble-lime plaster for interior surfaces that can be used to create smooth, matte, or slightly textured finishes. Thanks to its high alkalinity, it naturally inhibits mold growth and is particularly well-suited for bathrooms and damp areas.
Kalkglรคtte is a fine marble-lime finishing plaster (grain size up to 0.5 mm) designed for smooth and decorative surfaces. It is breathable, easy to apply and helps level minor substrate irregularities. The final appearance depends on the application technique and can vary from uniform matte to softly clouded decorative effects.
- Substrate preparation
Clean and stabilize the surface. Remove dust, grease, loose materials and contaminants. Repair damaged areas and prime if necessary. - Preparation
Mix thoroughly before use. - Application
Apply in 1โ2 thin layers using a trowel. The first layer evens the surface, the second creates the decorative finish. - Drying and conditions
Allow drying between layers. Protect from rapid drying.
Substrate
- Clean, dry, stable and slightly absorbent
- Free from dust, grease and loose particles
- Suitable: mineral plasters, concrete, primed plasterboard
- Not suitable: wood, plastics, non-absorbent or permanently wet surfaces
Layers and consumption
- Consumption: approx. 1 kg/mยฒ (1 mm layer)
- Two-layer application recommended for best results (~1.5 kg/mยฒ total)
- First layer evens substrate, second layer creates final finish
Projects coming soon
There are no projects related to this product yet.
Related products
Products that perfectly complement your selection.
