Garden Furniture Oil
Kreidezeit Garden Furniture Oil is a natural wood oil that protects and maintains outdoor wood surfaces, highlighting the natural grain and color of the wood. The oil penetrates deep into the wood, making it water- and dirt-repellent while allowing for easy maintenance and renewal.
- Binder: linseed oil, linseed stand oil, and tung stand oil
- Tools: brush, sponge or cotton cloth
- Layers: 2 layers (more if necessary)
- Substrates: untreated or previously oiled wood outdoors
Cost standard
0,06 l/m² per layer
Zones
Zones
Manufacturer
Manufacturer
Composition
- linseed oil
- tung stand oil
- linseed stand oil
- balsam turpentine
- natural resins
Kreidezeit Garden Furniture Oil is a natural oil-based wood treatment that does not form a film on the surface but penetrates deep into the wood, preserving its breathability and natural behaviour. Thanks to its elastic composition, the surface does not become brittle or crack and wears evenly over time, allowing for easy maintenance without having to completely remove the old coating.
Features
- Open to diffusion – allows the wood to breathe
- Water and dirt repellent
- Elastic – does not crack or become brittle
- Tints the wood lightly (a honey-like tone) and deepens the colour
- Good absorbency and penetrates deep into wood
- Biocide-free and environmentally friendly
Layers and consumption
- Suggested: 2 layers
- Cost: approx. 0,06 l/m² per layer
- Higher consumption for highly absorbent surfaces
Substrate
- Unprocessed, clean and dry wood
- Free of dust and grease
- Wood moisture < 15%
- Not suitable for surfaces with varnish or synthetic coatings
Tools
- Brush
- Sponge
- Cotton cloth
- Substrate preparation
- Sand the wood (P80–100), rounding the edges
- Remove dust and dirt
- Ensure the wood is dry and absorbent
- Oil preparation
- Mix before use
- If desired, tint with pigments (UV-protection and colour tone)
- Do not pour directly on surface
- Application
- Apply first layer with a brush, sponge or cloth
- After 10–20 min remove excess oil with a dry cloth
- Ensure the surface is uniform and not sticky
- If necessary, lightly sand before the second layer
- Apply the second layer in the same way
- Drying and conditions
- Working temperature minimum +10 °C
- Overcoatable after ~24 h (tannin-rich wood ~48 h)
- Full hardening ~4 weeks
- Maintenance and renewing
- Renew the surface when it becomes absorbent or grayish
- When necessary clean with water or natural soap
- Regular maintenance significantly extends lifespan
Note:
Adding pigments helps prevent the wood from turning grey and improves UV resistance outdoors.
Projects coming soon
There are no projects related to this product yet.
Related products
Products that perfectly complement your selection.
